mapmywindows make install error: "make: help2man: No such file or directory"

[sreedta8]

Hi

I'm trying to compile mapmywindows on Ubuntu Impish (21.10) distribution. I have installed all the necessary Xlib, libxdo, and libx11 dependencies appropriate for Ubuntu. I have downloaded the libxkeymacro files separately and included then in the untarred folder.

make runs okay but sudo make install gives the following error: make: help2man: No such file or directory

I have examined the various source files downloaded and I could not find any file named help2man

[sreedta8]

@TheDcoder one additional question, where should the xkeymacro.c and xkeymacro.h be saved?

[TheDcoder]

Hi @sreedta8,

I have examined the various source files downloaded and I could not find any file named help2man

help2man is a GNU program which generates man pages from a program's --help output. You need to install it from your distro's package repository. You can find out the package name and version of help2man in your distro from this list: https://repology.org/project/help2man/versions

After you find it, simply install it like any other package, that should satisfy the need for help2man :)

Thanks for bringing it up though, looks like I forgot to mention it.

one additional question, where should the xkeymacro.c and xkeymacro.h be saved?

In the xkeymacro directory, it's included in the repository but you'll have to initialize the sub-modules in git as it doesn't do that by default.

This can be done while cloning (git clone --recurse-submodules) or after cloning (git submodule update --init --recursive) to automatically fetch all the files under sub-modules.

And finally, I too have a question for you @sreedta8, how did you find this repo? Just curious.

[sreedta8]

@TheDcoder thanks for your prompt reply. Thanks for your guidance as well. I have been a WIndows user for 25+ years. Never touched Linux for real work. Now some significant pieces of data science and analytics I do works well when I'm on Linux, so I began working with Ubuntu about 2 months ago. On Windows, I use the Hide My Windows program to declutter my workspace and I was looking for something similar on Linux and the HMW webpage has a direct link to your repo mapmywindows. That is how I found this repo!

Thanks for your effort in developing this tool. I'm an applied statistician and not a programmer. I program only on an as needed basis which is not often. Working in Linux has been frustrating (coming from Windows) and liberating (the power and control a user has and the robustness of the OS, "not a single BSOD"). Once I'm able get it working I will let you know. If I run into any issues, I will report on this thread.

[TheDcoder]

@sreedta8 Welcome to the club 😁

I've been a long-time Windows user as well but I made the switch a few years ago and never turned back.

Good to know that the link-back in HMW's website is serving the purpose, makes me glad that I asked the author to mention it on their webpage :)

Best of luck with whatever you are doing. I'll be happy to answer any help queries.

[sreedta8]

@TheDcoder I spent at least 3 days looking for alternatives in Linux. I was exploring how to use the ```wmctrl``. So I'm really keen to get your MMW to work!

[sreedta8]

@TheDcoder I installed help2man and also set up the xkeymacro files correctly. Now the sudo make install ran correctly without any errors.
I was next able to change the default keys to Hide, Show and Exit - I'm using your app and this is really cool - I'm going to write an installation document and share it here. Thanks again!

[sreedta8]

@TheDcoder mapmywindows stopped working after I installed some security updates on my Lubuntu (Impish 21.10). When I use Ctrl+Shift+F7, the window blinks a little and is not hidden. Any ideas why that might be happening

Additionally when I run mapmywindows at my prompt (I do not know if I can run it or not) I get the following error:

(base) sreedta@home:~$ mapmywindows
Hide shortcut: Ctrl+Shift+F7
Show shortcut: Ctrl+Shift+F8
Exit shortcut: Ctrl+Shift+F9
X Error of failed request:  BadAccess (attempt to access private resource denied)
  Major opcode of failed request:  33 (X_GrabKey)
  Serial number of failed request:  18
  Current serial number in output stream:  20

I have restarted my machine, removed mapmywindows and compiled and installed it again. So far no luck!

[TheDcoder]

The error is from libX11 which is responsible for communicating with the X GUI server in Linux. Most likely your X configuration disallows grabbing keys from unprivileged processes, this is not a common configuration so unfortunately you'll have to ask for help in a distro specific support channel.

It could also be possible that you're using the newer Wayland display protocol which has more severe restrictions, if this is true then I am afraid MMW won't work for you.

An easy solution could be to try a different distro, you can safely migrate your home folder to preserve all of your local user settings and files :)

[sreedta8]

@TheDcoder Thanks a lot for note. I'm using the Lubuntu Default LxQt Desktop. The interesting thing is that the short cut keys worked for about 3 hours and then they stopped. Knowing the source of the error (libX11) is helpful. I will see how best to get it working again.

[TheDcoder]

Very interesting indeed. Did you change any settings after 3 hours? Did the error occur while the program was still running or did it stop working after you started it fresh?

[sreedta8]

@TheDcoder I did not change any settings. There were security updates and updates to my Ubuntu-Desktop. I ran those updates and rebooted my machine and the MMW functionality disappeared. So I removed the install folders and files and went through the installation from scratch to no avail.

[TheDcoder]

There's nothing wrong with your build, the issue is with permissions in your display server. I am not sure how the updates effected it, generally they shouldn't change any major functionality in security updates.

[sreedta8]

Do you know what should be the right set of permissions tI should set for the Display Server? When I checked what Display server I was using the output shows:

(base) sreedta@home~$ ps -e | grep tty
   1542 tty2     00:00:00 gdm-x-session
   1544 tty2     02:05:09 Xorg
   1556 tty2     00:00:07 lxqt-session
   1630 tty2     02:39:17 kwin
   1665 tty2     00:00:10 pcmanfm-qt
   1667 tty2     00:00:02 lxqt-globalkeys
   1668 tty2     00:00:02 lxqt-notificati
   1669 tty2     00:01:16 lxqt-panel
   1670 tty2     00:00:02 lxqt-policykit-
   1672 tty2     00:00:03 lxqt-runner
   1923 tty2     00:00:07 lxqt-powermanag

How do I check and change the permissions on any one of them?

[sreedta8]

@TheDcoder I figured out what I was doing wrong. I was launching mapmywindows at the main prompt without changing the directory to where I had installed mapmywindows. Once I did that everything is working well. Do I need add the install location to the PATH so that I do not need to change to the install directory? Thanks for your patience and your help! Have a wonderful weekend!
Update: After adding the install directory to the PATH, the command now works at the main prompt!