Triggering the camera by an external pulse

[shervinkoushan]

Hi!

We have an IMU that sends a pulse at 4kHz. The camera receives this pulse on GPIO 1.

Which parameters do we have to change to make the IMU pulses trigger the camera?
The camera should be running at 20Hz.

Thanks in advance!

[icolwell-as]

Hi @shervinkoushan, I assume this pulse is sent to the camera via hardware means? (voltage pulse to some input).

If so, you may have more luck reviewing the user manuals and documentation for your camera or reaching out to AVT support:
https://www.alliedvision.com/en/support/