Milk-V Duo Module KiCad footprint

[lotricekCZ]

Hello, is OrCAD (or whichever editor used) able to generate KiCAD-compatible footprint?
I am not the owner of the OrCAD license yet still want to use this module in my project, but I am unable to find any conversion tool online.
Thanks in advance

[pauleffect90]

MilkV_Duo_Module.zip
Here you go, mate.

[antonioaguilar]

@pauleffect90 how precise is the Kicad footprint for the Duo Module? Did you convert (or export) directly from Orcad / Allegro file STAMP_0R55_88.dra? or built yourself?

[pauleffect90]

should be ok. it's done after the DXF. didn't get to test it, unfortunately.

[antonioaguilar]

@pauleffect90 I have done some visual measuraments and I'm getting 28mm for width and height instead of the 27.3mm (as in the DXF file). My visual measurements could be off but it will be great to confirm the actual dimensions.

I have created at ticket #19 asking them to provide / confirm the actual mechanical dimensions.
Thanks.

[pauleffect90]

You re off. Just measured it with an 1000$ japanese caliper. 27.43. Considering the usual tolerances for a PCB like the module's are 0.2 mm ballpark, you can see anywhere from 27.1 to 27.5 mm. All in all, design around the pads, +- 0.2mm should not inconvenience you at all.