OpenWRT for Intel Galileo Board
OpenWRT version: git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42607
How to Build?
running "make V=99 " to build the OpenWRT firmware for Intel Galileo. When build finished, the kernel image and cross-compiler can be found in the following directory:
The kernel image: " /../build_dir/target-i386_i486_uClibc-0.9.33.2/linux-x86_galileo "
The cross-compiler: " /../staging_dir/toolchain-i386_i486_gcc-4.8-linaro_uClibc-0.9.33.2/"
======================
How to work?
put the following files to your tf card:
/boot/grub/grub.conf
/bzImage
/grub.efi
/openwrt-x86-galileo-rootfs.cpio.gz
===================
Notes:
（1）”bzImage” is in the directory of "build_dir/target-i386_i486_uClibc-0.9.33.2/linux-x86_galileo"
（2） the root filesystem "openwrt-x86-galileo-rootfs.cpio.gz" is in the directory of "bin/x86"
（3）"boot" and "grub.efi" are from the intel galileo web http://www.intel.com/support/galileo/sb/CS-035101.htm , download the "SD-Card Linux Image". And you should modify the "grub.conf" as follow:
default 1 timeout 1
color white/blue white/cyan
title Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU kernel --spi root=/dev/ram0 console=ttyS1,115200n8 earlycon=uart8250,mmio32,$EARLY_CON_ADDR_REPLACE,115200n8 reboot=efi,warm apic=debug rw initrd --spi
title Clanton SVP kernel-MassStorage initrd-MassStorage image-full IMR-On IO-APIC/HPET NoEMU debug root (hd0,0) kernel /bzImage root=/dev/ram0 init=/init console=ttyS1,115200n8 earlycon=uart8250,mmio32,$EARLY_CON_ADDR_REPLACE,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5 rootimage= initrd /openwrt-x86-galileo-rootfs.cpio.gz
