RDMA-MESH

rdma-mesh is a simple rdma communication test program for jiajia(SDSM).

It uses multi-threads to establish RDMA RC full connection ( any two hosts in a cluster have a connection ), and a simple communication example between two hosts.

Dependency

• librdmacm
• libibverbs

Structure

• client thread: run_client() in rdma-mesh/rdma_mesh.c, used to prepare the connection resources and listen the connect request.
• server thread: run_server() in rdma-mesh/rdma_mesh.c, used to prepare the connection resources and initiate the connect request.

After the connection established, cm_id_array[i] (struct rdma_cm_id) in every host(!i) was used to communicate with host i.

Beside the threads that used to establish the connection, there are other threads used to construct a simple communication model.

• rdma_client_thread: post send wr continuously.

• rdma_listen_thread: post recv wr continuously.

• rdma_server_thread: wait new msg and serve.

Usage

As an example program, rdma-mesh only support two hosts (master-slave). (Complete version (i.e. more hosts version) can be found in jiajia.)

ip_array in main.c is the ip array of hosts in a cluster, which need to reconfigure according to the cluster's setting.

1. clone: clone the program to two hosts

git clone [email protected]:Youpen-y/rdma-mesh.git

2. modify: modify the Makefile CFLAGS, one with -DMASTER and another without.

# master
CFLAGS = -Wno-unused-variable -Wall -g -DMASTER

# slave
# CFLAGS = -Wno-unused-variable -Wall -g

3. build

make

4. execute

./mesh <host_id> <total_hosts>

# master: ./mesh 0 2
# slave:  ./mesh 1 2

Example:

slave

./mesh 1 2
Host 1: Server listening on port 40001
Received Connect Request from host 0
Host 1: Accepted connection
Host 1: Connection established
generate string: 2SNzE5ghy
Received data at in_mr[0] address 0x55ff17c4a000: MsBFoLqk9
Received data at in_mr[1] address 0x55ff17c55000: K7d0JteM8
generate string: EK1CuxCgp
Received data at in_mr[2] address 0x55ff17c60000: dwTo6lCGv
generate string: bo1Nm6TNc
Received data at in_mr[3] address 0x55ff17c6b000: FZ3JDHuuX
generate string: dX1qAZsVY

master

./mesh 0 2
After retried 0 connect, Host 0: Connected to host 1
Connection setup with host 1
generate string: MsBFoLqk9
generate string: K7d0JteM8
Received data at in_mr[0] address 0x562a316ad000: 2SNzE5ghy
Received data at in_mr[1] address 0x562a316b8000: EK1CuxCgp
generate string: dwTo6lCGv
Received data at in_mr[2] address 0x562a316c3000: bo1Nm6TNc
generate string: FZ3JDHuuX
Received data at in_mr[3] address 0x562a316ce000: dX1qAZsVY

5. debug The program is produced by vscode, if you want to debug the program, please note the "args": ["0", "2"],/"args": ["1", "2"] in launch.json.

6. clean

make clean

Getting Help

The best way to ask questions is to submit an issue on GitHub.

Contributing

Welcome any bug fix and feature extension. Have other thing to discuss, welcome to contact! ([email protected])